How To Light Water Heater Pilot

How To Light Water Heater Pilot - If you're taking a hot shower and the water suddenly turns cold, the pilot light on your water heater may have gone out. Don't worry, relighting the pilot light on your water heater is a simple task that you can do yourself. Here are some tips and ideas that can help you relight the pilot light on your water heater in no time.

Step-by-Step Guide: How to Relight a Water Heater Pilot Light

1. Safety First!

Make sure all the gas valves are turned off before you start. Turn off the power to the water heater, and close the gas line valve. Do not attempt to relight the pilot light if you smell gas.

how-to-relight-a-water-heater-pilot-light.png

2. Locate the Pilot Light

The pilot light is usually located near the bottom of the water heater. Check your owner's manual if you're having trouble locating it. Make sure there is no debris or dust in the area around the pilot light.

pilot-light-hot-water-heater

3. Turn the Pilot Light Knob to "Pilot"

Turn the gas knob on the control box to "pilot". Make sure the "off" and "pilot" are both visible on the control box.

4. Press and Hold the Pilot Light Button

Hold down the pilot light button while you light the pilot flame. Use a long lighter or a matchstick to light the pilot light. Hold the button down for at least 30 seconds after lighting the pilot light.

how-to-fix-a-water-heater-pilot-light

5. Turn the Gas Knob to "On"

After holding down the pilot light button, turn the gas knob to "on." If the pilot light goes out, repeat the process from step 3.

how-to-light-the-pilot-on-your-water-heater

Tips and Ideas for Relighting a Water Heater Pilot Light

1. Clean the Pilot Tube

If you're having trouble relighting the pilot light, the problem could be a clogged pilot tube. Use a small wire or a needle to remove any debris or dirt from the pilot tube.

2. Check the Thermocouple

The thermocouple is a safety device that senses if the pilot flame goes out. If your water heater keeps shutting off, check the thermocouple. If it's dirty or damaged, clean or replace it.

3. Call for Professional Help

If you're not comfortable relighting the pilot light or if you notice any other problems with your water heater, call a professional plumber for help. Trying to fix a complicated issue could lead to serious injury or damage.

With these tips and ideas, you can easily relight the pilot light on your water heater and enjoy a hot shower again. Remember to always put safety first and call for professional help if needed.

Find more articles about How To Light Water Heater Pilot